Metal Roof Installation in Frisco, TX

Metal Roof Installation at 6576 Lincoln Hills Court, Frisco, TX

In the summer of 2025, we completed a large-scale corrugated metal roof installation at a residence in Frisco's Stonebriar neighborhood. The project involved a full replacement of the existing roof system using the TAMKO R-Panel Metal Roofing System in Matte Black — a project spanning 52.6 squares and completed in a single working day, with a four-hour cleanup the following morning.

This page exists to document that work and give neighboring homeowners in Stonebriar and across Frisco a clear, honest picture of what a corrugated metal roof installation actually looks like when it's done right.

---

Why This Frisco Homeowner Chose Wortham Brothers

Chuck Hebert didn't mince words in his review, and we appreciate that.

> "Can't say enough good things about these guys. Fair price, came when they said they would, worked straight through the heat of a Texas summer day and did the job in one day. Next morning a 4 hour clean up finished the job. The contact person, Wes, gave me straight answers and did what he said he would. Outstanding job all around."
> — Chuck Hebert, Stonebriar, Frisco, TX

What stands out in Chuck's experience is what should be standard but often isn't: showing up when promised, working efficiently without cutting corners, communicating honestly, and leaving the property clean. These aren't extras — they're the baseline we've held ourselves to since 1986.

We're a family-owned company. We've been operating in the Dallas-Fort Worth area for nearly four decades, and our reputation is built on exactly the kind of job Chuck described. When you've completed more than 128,000 roofs across the Metroplex, you develop systems that work — for the homeowner and the crew. On a job like this one, where a 52-square corrugated metal roof needs to go down on a 100-degree Texas summer day, those systems matter.

Our point of contact on this project was Wes, who handled the estimate, the scheduling, and the day-of coordination. Homeowners consistently tell us that clear communication with a single knowledgeable contact makes the process far less stressful than they expected. That's intentional. You shouldn't have to chase anyone down for a straight answer.

---

The TAMKO R-Panel Metal Roofing System

TAMKO is a manufacturer we trust for metal roofing applications, and the R-Panel system is one of the more proven designs in the corrugated metal roof category. Here's what makes it a sound choice for North Texas homes.

# What the R-Panel Design Offers

The R-Panel profile is a structural metal panel system characterized by its raised ribs and broad flat sections between them. This geometry isn't decorative — it serves a functional purpose. The raised ribs channel water away from the panel seams more effectively than flat metal, and the overall rigidity of the profile means less flex under thermal cycling. In a region like Frisco where roof surfaces routinely hit 160–180°F in midsummer, thermal movement is a real engineering concern, not an abstract one.

# Why Matte Black Works in This Application

A Matte Black finish on a corrugated metal roof does absorb more radiant heat than lighter alternatives, but in a residential application with adequate attic ventilation and insulation, this is manageable. The finish TAMKO applies to the R-Panel system is designed to resist UV degradation, chalking, and color fade over the long term — all factors that matter more in North Texas than in climates with milder sun exposure.

# Long-Term Performance

Metal roofing, when properly installed, substantially outlasts asphalt shingles. A corrugated metal roof in the Frisco climate should be expected to last 40–70 years depending on substrate, coating quality, and installation technique. The TAMKO R-Panel system is backed by manufacturer material warranty coverage, and our work on this project is covered by our standard 10-year workmanship warranty in addition to the lifetime material coverage.

---

Why Frisco Roofs Need More Than Standard Materials

Frisco sits in one of the most meteorologically demanding regions in the country for residential roofing. This isn't an exaggeration — it's the reason material selection and contractor experience genuinely matter here in ways they might not in less extreme climates.

# Hail

Collin County, where Frisco is located, sits within the notorious "Hail Alley" corridor that runs from Texas through Oklahoma and into the central plains. Hailstorms in this region regularly produce stones in excess of one inch in diameter, and the North Texas hail season runs from roughly March through June, with secondary activity possible in the fall. Hail impact causes immediate and cumulative damage to asphalt shingles — granule loss, bruising, and cracked mat — that can accelerate deterioration by years even when the damage isn't visually obvious from the ground.

A corrugated metal roof handles hail impact fundamentally differently. Metal deflects and dents rather than cracks, and while large hail can dent a metal panel, it doesn't compromise the waterproofing function the way granule loss does on asphalt. For homeowners who've been through multiple insurance claims on shingle roofs, this shift in material performance is often a primary driver in choosing to go metal.

# Summer Heat

The project at Lincoln Hills Court was completed in July — peak Texas summer. Our crew worked through sustained heat to meet the one-day completion target Chuck mentioned in his review. Frisco summers routinely produce periods of 100°F-plus temperatures that are brutal for crews and punishing for roof materials. Asphalt softens, adhesive strips lose their bond, and thermal cycling causes expansion and contraction that works against sealants and flashing over time. Metal roofing panels are engineered for dimensional stability across a wide thermal range, which makes them more predictable as a system under these conditions.

# Ice and Wind

North Texas doesn't get extended winters, but it does get ice storms — sometimes severe ones. The concern with ice isn't snow load, which is rarely significant here, but rather ice damming and the penetrating freeze-thaw cycles that stress any roofing system. Metal panels with proper underlayment and flashing are generally more resistant to ice infiltration than aging asphalt systems, and the smooth surface sheds ice more readily once temperatures climb.

Wind is also a year-round factor in the Metroplex. The open terrain of North Texas provides little natural wind break, and the combination of flat panels and raised rib seams in an R-Panel system provides strong resistance to wind uplift when panels are fastened to spec.

---

What This Means If You Live Near Stonebriar

Stonebriar is an established Frisco neighborhood, and many of the homes here were built in the late 1990s through mid-2000s. That means original roofing systems — if they've never been replaced — are now 20 to 25 years old. Standard three-tab and architectural shingles in this climate have a realistic service life of 15–25 years depending on installation quality, ventilation, and weather history. Many homes in this area are approaching or past that window.

We're also seeing a meaningful uptick in Frisco homeowners choosing to replace aging shingle roofs with corrugated metal systems rather than re-shingle again. The reasoning is straightforward: if you're going to tear off the old roof anyway, the incremental cost difference between a quality shingle replacement and a TAMKO R-Panel system amortizes favorably over the extended lifespan of the metal roof. You do the job once. Correctly.

If your home in or near Stonebriar has an original roof, or if you're uncertain when your last replacement was completed, a professional inspection is worth scheduling before the next hail season begins.

---

Frequently Encountered Problems on Frisco Roofs

Over decades of working across Frisco and neighboring communities including Prosper and Allen, we've developed a clear picture of what goes wrong most often on North Texas roofs — and how to prevent it.

Improper ventilation: One of the most common installation errors we see on existing roofs is inadequate attic ventilation. Poor ventilation traps heat in the summer, accelerating shingle degradation from underneath. In winter, it contributes to moisture accumulation and can create ice dam conditions.

Failed flashing: Valleys, penetrations (pipes, vents, chimneys), and eave transitions are where most roof leaks originate. Flashing that was installed with substandard materials or technique degrades faster than the field panels and is often the first point of failure on a roof that looks fine from the street.

Wind-lifted starter strips: A surprising number of older roofs in Frisco were installed with minimal or no starter course at the eave, leaving the first course of shingles vulnerable to uplift. This is an easy thing to miss on a casual inspection but creates a failure point in high-wind events.

Storm damage that wasn't documented: Hail doesn't always cause immediately visible leaks. Interior signs of water intrusion — staining, soft spots in decking, deteriorated insulation — often trace back to storm events from years prior that were never inspected or addressed.

---

How We Approach Each Project

We don't believe in rushing through a job, but we don't believe in unnecessary delays either. The Lincoln Hills Court project illustrates our standard approach: thorough planning before the crew arrives, efficient execution during the installation day, and a clean, careful wrap-up that respects the homeowner's property.

Our crews are experienced in both metal and shingle applications. A corrugated metal roof installation is technically distinct from shingle work — panel alignment, fastener placement, seam treatment, and flashing integration all require specific training and experience. This is not a job where a crew that "does some metal" is the same as one that specializes in it.

We are certified by Owens Corning, Atlas, CertainTeed, and GAF — manufacturer certifications that require demonstrated installation standards and ongoing performance accountability. We've maintained an A+ rating with the Better Business Bureau since 1992.

For homeowners in Plano and surrounding communities as well, our process is consistent: honest assessment, clear pricing, scheduled work that we show up for, and results we're prepared to back with a 10-year workmanship warranty alongside manufacturer material coverage.

---

Get a Free Inspection in Frisco

If you're in Stonebriar or anywhere in Frisco and you're considering a corrugated metal roof — or simply want to know the actual condition of your existing roof — we'll come out and give you a straight answer. No pressure, no inflated repair lists. Just an honest professional assessment of what's there and what your realistic options are.

We're available Monday through Saturday, 6AM to 8PM.

Call us at 817-ROOFING or visit wbroofing.com to schedule your free inspection.

If you refer a neighbor who goes forward with a project, our referral program pays $250 to $1,000 or more depending on the scope — because the best projects we land come from homeowners who've already seen our work firsthand.

We've been doing this since 1986. We'll still be here after the next hail season, and the one after that. That's the difference a family-owned company with a four-decade track record makes — not just in marketing language, but in accountability when it matters.